| ALVAN SABET CO. |  |
 |
Fastness & Dyeing Properties | |||||||||
| No. | Color Sample | ARIAMIN |  |
 |
 |
 |
 |
 |
 |
 |
||
| 1 |  |
Yellow 5G | Y-107 | 1.5% | 4 | 3 4 |
4 | 50 | B | V.G | 4 | 90 |
| 2 |  |
Yellow | Y-12 | 1.5% | 4 | 3 4 |
4-5 | 30 | A | F-G | 4 | 40 |
| 3 |  |
Yellow GE | Y-86 | 1.5% | 6-7 | 3-4 4-5 |
4-5 | 80 | B | V.G | 3 | 90 |
| 4 |  |
Yellow GRE | Y-11 | 1.5% | 2-3 | 4 4-5 |
4-5 | 50 | B | P | 4-5 | 80 |
| 5 |  |
Orange SE | 0-26 | 2% | 2-3 | 2-3 3-4 |
4-5 | 20 | C | F | 4-5 | 80 |
| 6 |  |
Scarlet F4BS | R-23 | 2% | 2-3 | 2-3 3-4 |
4-5 | 30 | C | F-G | 4-5 | 90 |
| 7 |  |
Red BLE %150 | R-81 | 2% | 5 | 2-3 3-4 |
4-5 | 40 | A | G | 4 | 60 |
| 8 |  |
Red 12B | R-31 | 2% | 4 | 2-3 3-4 |
4 | 30 | A | G | 4 | 60 |
| 9 |  |
Bordeaux 3B | R-16 | 2% | 2-3 | 2-3 3-4 |
4-5 | 90 | A | F-G | 4 | 60 |
| 10 |  |
Violet 3BR | - | 2% | 5 | 3 4 |
3 | 20 | B | F | 3 | 80 |
| 11 |  |
Tur. Blue LGL | B-86 | 2% | 5-6 | 3-4 4-5 |
3 | 50 | B | F-G | 3-4 | 80 |
| 12 |  |
Blue TAB | - | 2.5% | 3-4 | 3-4 4-5 |
4-5 | 60 | B | G | 4-5 | 80 |
| 13 |  |
Sky Blue 5BL | - | 2% | 3-4 | 3-4 4-5 |
4-5 | 60 | B | G | 4-5 | 80 |
| 14 |  |
Blue B2RE | B-71 | 2.5% | 5 | 2-3 3-4 |
4-5 | 30 | B | G | 4-5 | 90 |
| 15 |  |
Brown MN | - | 2% | 5 | 3-4 4-5 |
4 | 40 | B | G | 4 | 80 |
| 16 |  |
Brown B | - | 2% | 4-5 | 3-4 4-5 |
4-5 | 50 | B | G | 4-5 | 80 |
| 17 |  |
Black VSF %600 | B1-22 | 3% | 5-6 | 3-4 4 |
4 | 50 | C | V.G | 4-5 | 90 |
| 18 |  |
Black VSF Conc. | B1-22 | 3% | 5-6 | 3-4 4 |
4 | 30 | C | V.G | 4-5 | 90 |
| 19 |  |
Black ANBN | B1-166 | 3% | 5 | 3 4 |
4 | 40 | C | G | 4 | 90 |
ARIAMIN Dyestuffs
ARIAMIN dyestuffs are direct dyes which are used for the dyeing of cellulosic fibers. This hroup is recommended for exhaustion semi-continious and continious printing process. ARIAMIN direct dyes are included in the "E" group which is recommended fot HT system too.
S.D.C Classification
The dyeing properties is classified as follows:
Class A: Self levelling dyes:
This group is keeping good levelling or migration properties.
Class B: Salt controlable:
These dyes have good levelling or migration properties which can be dyed uniformly by adding controlled salt.
Class C: Tempreture controlable
The dyes with poor migration which control by tempreture and salt.
Dyeing Process
| Drying ... Rinsing with cold water ... Fixation ... Rinsing with cold water |
ARIAMIN Dyes Cellulosic:
A) ARIAGAL POL levelling agent
B) X% dye
C) Glauber's salt in 3 Portions
Rinse 2x10 min. Cold (after treating)
when dyeing with Benzo
black V.S.F, Black FG
add soda at the start (pH 8~9)
Required amount of Glauber's salt comparing dye %
| Dye % | <0.25 | 0.25~0.95 | 0.5~1 | 1~2 | 2~3 | 3< |
| Salt % | 5 | 5~10 | 10~15 | 15~20 | 30 | 40 |
After treatment with: ARIAFIX WES
A) 1~3% ARIAFIX WES
Fastness Methods
| Light fastness (1/1) | ISO 105 B02 | |
| Washing fastness (staining) | ISO 105 C03 | |
| Rubbing fastness (staining) | ISO 105 X12 | |
| Perspiration fastness | ISO 105 E04 |
Discharge Ability
| V.G: Very Good | F: Fair | |
| G: Good | P: Poor | |
| M: Moderate |
Solubility
Based on gr/lit at 80°C
